User Guide Part 7

Installation of the We.R™ System
192
We.R
™
System User Guide
To set up such a scenario:
a) Click over the Scenarios tab to open the Scenarios page.
b) Select which scenario is to be set (i.e. turn ON / turn OFF).
c) Select the devices you want to turn OFF upon arm mode of operation by
marking their rows.
Figure 158: Setting up Z-Wave
®
Devices to Turn OFF upon Arming the System
Following is an example of controlling typical Z-Wave® device:
 To control a thermostat:
a. Click over the Smart Home tab to open the Smart Home page.