User Guide Part 7

Installation of the We.R™ System
172
We.R
™
System User Guide
Accessories available for the Universal Transmitter:
 Double-sided adhesive tape.
3.13.1. The Universal Transmitter Function
The Universal Transmitter incorporates the following functions:
 Bi-directional wireless device.
 Flexible application definition as Security Device, Flood/Fire/Gas Detector, Panic
Button, etc.
 May be configured, via the We.R
™
Web Application, to Normally Open or Normally
Close modes.
 Dual-LED (green/red) for open/close status indication.
 30 cm (1 feet) cable.
 Data security is ensured with 128-bit AES encryption.
 Up to 500m (1640 feet) RF range (open air) communication.
 Unique electronic serial number.
 Supports automatic over-the-air software upgrade programming and configuration.
 Provides long operation period while powered by a single standard AA-size Alkaline
battery.
3.13.2. Installing the Universal Transmitter
The Universal Transmitter should be mounted near the device it is interfacing with.
The Universal Transmitter mounting base is the unit’s back cover (where it also serves the
purpose of battery cover).
The base should be disassembled from the Universal Transmitter body, as demonstrated in
Figure 140 below, and attached either by the double-sided tape (pre-attached to the base) or
using screws as demonstrated in Figure 141 below.