User Guide Part 7

Installation of the We.R™ System
We.R
™
System User Guide
187
Once selected, the following Add New Device window will pop-up:
Figure 152: Add Z-Wave
®
Device Installation Stopwatch
Similar to the standard We.R
™
Add Device procedure described above, this is a count-down
stopwatch which counts a period of 3 minutes, within which the pairing button (switch) on the
Z-Wave
®
remotely controlled device must be pressed to initiate the pairing process
(see Appendix G Pairing and Bonding for details of the pairing process).
Once paired-up, the device will communicate with the We.R
™
Z-Wave
®
Controller and be
configured, according to its features, onto the We.R
™
system.
Once communicating properly with the Z-Wave
®
Controller;
 The stopwatch will freeze, and
 The device will be added to the We.R
™
database and will be displayed in the
Smart Home Data Window page.
 The device will appear in the Devices (left) pane and its details, to be manually
typed-in, within the data fields of the right pane.
 Any change made to the data fields in the right pane must be saved by clicking
over the button.