User Guide Part 7

Installation of the We.R™ System
We.R
™
System User Guide
183
3.14.3. Installing the Z-Wave
®
Controller
Notes: The following procedure of installing the We.R
™
Z-Wave
®
Controller
is based on the assumption that the Z-Wave
®
Controller is being added
onto a fully operational We.R
™
system.
Due to the installation procedure, a Power Failure event will be logged and
a notification should be expected.
1. Disconnect the Central Control
Unit (CCU) from power by
plugging-out the power adaptor
cube from the electric power
(mains) socket.
2. Disconnect the power cord from
the CCU:
Note: The mini-USB
™
socket is for the We.R
™
power cord only. Do not
connect other USB
™
equipment to this socket.