User Guide Part 8

Port Checking
294
We.R
™
System User Guide
Figure 218: Telnet Search Command
e) Press the Enter key.
If the port check is successful, a blank window will open.
Figure 219: Telnet Blank Window
If the port check is not successful – an error message will pop-up.
This means that port 43001 is blocked and needs to be opened on the router.
To unblock the port please refer to the router's configuration documentation.
Note: For Windows 7 – make sure the Telnet program is enabled;
see the below Appendix E Enable Telnet Program in Windows 7.