User Guide Part 8

Administration of the We.R™ System
202
We.R
™
System User Guide
Panic Alarms
4.2.1. Security Alarms
Once the system is armed (full arm or night arm or day arm), an alarm will be triggered in the
following security events:
A Magnetic Sensor (MGL) monitored window/door was opened.
A Motion Detector (PIR) or a Motion Indoor Photo Detector (IPD) detected some motion
within its detection range, or, if any device is tampered while the system is armed.
If a Security Alarm was triggered, the User will receive an Alarm Notification on his We.R
™
Web
Application (assuming the User is logged in) and on his smartphone (where the We.R
™
Mobile
Application software was installed).
On the We.R
™
Web Application’s Status/Activation Bar:
Figure 163: Security Alarm Notification on the We.R
™
Web Application
The status icon will blink in red, and
Two buttons will lit in red allowing the User to:
Stop the Siren sound,
Disarm the system.
On the We.R
™
Mobile Application, the following notification message window will pop-up to
draw the User’s attention: