User Guide Part 8

Maintenance of the We.R™ System
We.R
™
System User Guide
237
Figure 198: Dismounting the Motion Detector
2. The batteries’ (back) cover is the mounting base of the Motion Detector therefore
dismounting it also reveals the Motion Detector batteries compartment.
3. Remove the batteries by pressing them slightly towards the negative (–) pole (towards the
bottom end of the Motion Detector) and extracting them out, one at a time.
5.1.3.2. Installing New Batteries
1. Install the new batteries as demonstrated in Figure 199 below (the positive () poles aiming
towards the top end of the device):