User Guide Part 8

Administration of the We.R™ System
226
We.R
™
System User Guide
Figure 191: Right Pane of Door/Window Magnetic Sensor
Once all Device definitions are provided, the button needs to be clicked upon to
store the data in the system.
4.5.4. Advanced Configurations of the We.R
™
Devices
4.5.4.1. Entry/Exit
This feature provides the owner with time gap to arm (or disarm) the system while entering (or
exiting) the premises without triggering an alarm.
Note: This configuration may be enabled, per device, for the security
devices (PIR/IPD/MGL).
Once the Entry/Exit feature is enabled:
A premises entry delay of 30 seconds will be triggered upon detection event, allowing
the User to disarm the system prior to triggering an alarm.
In case a Siren is installed in the system, the delay will be accompanied by short beeps
to notify the User about the delay.
Name/Location
Arm Scenarios
Disarm Scenarios
Special Features