User Guide Part 8

Administration of the We.R™ System
We.R
™
System User Guide
225
A Device may be removed by selecting its row in the left pane of the Devices page and clicking
over the button.
4.5.3. Editing Devices’ Properties
Note: Editing Devices’ properties is possible only by a Master User and with
the We.R
™
Web Application.
The We.R
™
Web Application also enables editing of Devices already installed.
The editable data include the Device’s Name/Location as well as the Devices’ operational data
(Arming/Disarming Scenarios and special features).
Fields for such operational data are revealed/covered upon clicking over the /
button.
These fields might include:
 Arming scenarios – to define if the Device will be included in the Day and/or Night
arming scenarios.
 Arming Scenarios – what would the Device trigger (detection response) in case armed.
 Non-armed Scenarios – some devices might also be functional even if not armed (i.e.
the Door/Window Magnetic Sensor may chime upon detection even if not armed to
inform the User of entries to the premises) and this data fields define such
functionalities.
 Special features – if the Device has other data to be considered for proper system
operation (i.e. the Wireless Access Control Tag Reader can be installed indoor or
outdoor where indoor it is used for system arming like the Remote Control Unit and
outdoor – as a door bell), the operation data (scenarios) need to be defined.
A right pane demonstrating all the above is the Door/Window Magnetic Sensor installation
pane: