User Guide Part 5

Installation of the We.R™ System
We.R
™
System User Guide
153
4. A roll-down selection menu will open.
5. Click over the _Add Flood Detector_ option of the menu as illustrated in Figure 121 above:
6. An Add New Device (Flood Detector) window will pop-up and its timer will start running.
Figure 122: Add Flood Detector Window
7. Verify that the Device Type is Flood Detector.
8. The down-counter provides a time-frame of three (3) minutes within which the battery
should be installed to power-up the Flood Detector, as demonstrated in Figure 123 below:
Note: In case the installation of the battery could not be accomplished
within the three (3) minutes period, it is possible to restart the process by
applying step 2 (on page 152) and onwards again.
Verify battery polarity to match marking within the unit body.
9. The insertion of battery into the Flood Detector triggers a handshake process in which the
Flood Detector communicates with the CCU to inform it of its presence and the CCU add it
to its peripherals’ inventory.