User Guide Part 5
Installation of the We.R™ System
152
We.R
™
System User Guide
3.11.3. Adding the Flood Detector to the We.R
™
System
The Flood Detector need to be functionally added to the system following the above described
physical installation procedure.
The addition of the Flood Detector is a standard Add Device procedure performed as follows:
Note: You may also want to refer to paragraph 5.1 below to get acquainted
with the process of installing/replacing a battery in the Flood Detector.
1. Prepare a single AA-size Alkaline battery required to power the Flood Detector.
2. Activate the We.R
™
Web Application.
3. Select the Devices page (tab) and click over the button.
Figure 121: Add Flood Detector Device Utilizing Web Application