User Guide Part 5

Installation of the We.R™ System
148
We.R
™
System User Guide
 Tamper Alarm – when the Transmitter unit is ripped off its base.
 Provides long operation period while powered by a single standard AA-size Alkaline
battery.
3.11.2. Installing the Flood Detector
The Flood Detector should be mounted near the flood risked area.
Figure 117: Releasing the Flood Detector Transmitter Base
The Flood Detector Transmitter Unit mounting base is the unit’s back cover (where it also
serves the purpose of battery cover).
The base should be disassembled from the Transmitter Unit body, as demonstrated in Figure
117 above, and attached either by the double-sided tape (pre-attached to the base) or using
screws as demonstrated in Figure 118 below.
The Flood Detector’s Sensor Unit mounts directly utilizing either the double-sided tape (pre-
attached to the Sensor’s bottom) or using screws as demonstrated in Figure 119 below.