User Guide Part 3
Installation of the We.R™ System
90
We.R
™
System User Guide
3.6.2. Installing the Camera
Note: Rattling sounds might be heard during the installation process of the
Camera. This is the internal tampering prevention mechanism and no
damage was made to the Camera.
The Camera can be mounted on a wall or the corner of a room using the mounting base.
The mounting base is the Camera back cover which should be disassembled from the
Camera, as demonstrated in Figure 59 below, and attached to the wall either by the double-
sided tape (pre-attached to the base) or using screws as demonstrated in Figure 60 below.
Figure 59: Releasing the Camera Wall Mounting Base