User Guide Part 3

Installation of the We.R™ System
We.R
™
System User Guide
131
Note: The Siren will double-beep following the insertion of the first two (2)
consecutive batteries to indicate proper power-up sequence.
Verify batteries polarity to match marking within the batteries’ compartment.
Note: In case the installation of the batteries could not be accomplished
within the three (3) minutes period, it is possible to restart the process by
applying step 2 (on page 129) and onwards again.
9. The insertion of batteries into the Siren triggers a handshake process in which the Siren
communicates with the CCU to inform it of its presence and the CCU add it to its
peripherals’ inventory.
10. If the CCU did not detect the new Siren within this time-frame, the following error ( )
message will appear within the Add New Device window:
Figure 98: Add New Siren Timeout Error Message
In such a case, it is possible to re-initiate the Add New Device process by clicking over the
button.