User Guide Part 3
Installation of the We.R™ System
We.R
™
System User Guide
125
3.9.2. Installing the Siren
The Indoor Siren is designed be mounted on a vertical wall using the mounting base.
Figure 92: Releasing the Indoor Siren Mounting Base
The mounting base should be disassembled from the Indoor Siren body, as demonstrated in
Figure 92 above, and attached to the wall either by the double-sided tape (pre-attached to the
base) or using screws as demonstrated in Figure 93 below.
Slightly press on the mounting base’s tab and slide it in the tabs direction to release it from the
Indoor Siren body.
3.9.2.1. Siren Positioning Recommendations
For optimal surveillance, the following factors must be taken into consideration when selecting
the Indoor Siren mounting position: