User Guide Part 3

Installation of the We.Râ„¢ System
We.R
â„¢
System User Guide
85
7. Add Device window will pop-up (see Figure 56 below).
8. Verify that Device Type is Key Fob.
Figure 56: Add Device Window – Key Fob
9. Click over the button to open the list of all pre-defined system Users (see
paragraph 3.3.6.4 above).
Note: The Remote Control Unit is a specific User device therefore; its User
need to be defined/added prior to the following described User
assignment.
10. Select the specific User this Remote Control Unit (KF) should be assigned by clicking over
its name.
11. Click over the button to assign the Remote Control Unit (KF) to its specified
User.
12. The assigned User name will be displayed on the Add Device window (above Figure 56).
13. The timer will start its count-down. It provides a time-frame of three (3) minutes within
which the battery should be installed.