Manualshelf

User Guide Part 3

ManualsBrandsEssence Security International ManualsElectronicsFlood detector
31323334353637383940
Installation of the We.R™ System
118
We.R
™
System User Guide
3.8.3. Adding the Magnetic Sensor to the We.R
™
System
The Magnetic Sensor need to be functionally added to the system following the above
described physical installation procedure.
The addition of the Magnetic Sensor is a standard Add Device procedure as follows:
Note: You may also want to refer to paragraph 5.1 below to get acquainted
with the process of installing/ replacing a battery in the Magnetic Sensor.
1. Prepare a single AA-size Alkaline battery required to power the Magnetic Sensor.
2. Activate the We.R
™
Web Application.
3. Select the Devices page (tab) and click over the button.
Figure 85: Add Magnetic Sensor Device Utilizing Web Application