User Guide Part 3

Installation of the We.R™ System
We.R
™
System User Guide
107
Figure 73: Add Motion Detector Device Utilizing Web Application
Note: You may also want to refer to paragraph 5.1 below to get acquainted
with the process of installing/ replacing a battery in the Motion Detector.
1. Prepare the two (2) AA-size Alkaline batteries required to power the Motion Detector.
2. Activate the We.R
™
Web Application.
3. Select the Devices page (tab) and click over the button.
4. A roll-down selection menu will open.
5. Click over the _Add Motion Detector_ option of the menu as illustrated in Figure 73 above: