User Guide Part 3
Installation of the We.R™ System
104
We.R
™
System User Guide
The Motion Detector must be installed with the spherical lens pointing down.
The Motion Detector should not be facing sunlight or other strong light sources
including installation opposite to a window.
For maximal effective detection range, the center of the Motion Detector should be
installed 2.1 meters (6.9 ft.) to 2.3m (7.5 ft.) above the floor.
Note: Lower positioning of the Motion Detector will limit its detection range.
The Motion Detector must be mounted within 700m (2300ft) (open air nominal) of the
CCU.
The wall mounting base includes eight (8) holes to allow maximum flexibility of
installation.
Six out of these eight are extra holes (punch-outs covered with thin plastic) that may be
removed if necessary.
Figure 71: Motion Detector Wall-mounting Base with Screws
3
4
5
8
7
6
2
1