User Guide Part 3

Installation of the We.R™ System
102
We.R
System User Guide
Employs sealed optics and temperature compensation for the Motion Detector to
become immune to direct light, insects and pets (optional) for reduction of false alarms.
Utilizes multi-zone spherical lens for exceptional detection coverage (90
o
horizontal,
105
o
vertical) and detection range of about 12m (39ft).
Supports automatic over-the-air software upgrade programming and configuration.
Walk test mode.
Tamper Alarm when the unit is tilted.
Provides long operation period while powered by two (2) standard AA-size Alkaline
batteries.
3.7.2. Installing the Motion Detector
Note: Rattling sounds might be heard during the installation process of the
Motion Detector.
This is the internal tampering prevention mechanism and no damage was
made to the Motion Detector.
The Motion Detector can be mounted on a wall, or the corner of a room using the mounting
base.
The mounting base is the Motion Detector back cover (also serving the purpose of batteries’
cover), which should be disassembled from the Motion Detector, as demonstrated in Figure 70
below, and attached to the wall either by the double-sided tape (pre-attached to the base) or
using screws as demonstrated in Figure 71 below.