User Guide Part 3
Installation of the We.R™ System
We.R
™
System User Guide
91
3.6.2.1. Camera Positioning Recommendations
Note: The Camera MUST always be installed with the lens pointing down.
For optimal surveillance, the following factors must be taken into consideration when selecting
the Camera mounting position:
A flat vertical wall surface, or
In a corner of a room (between two walls).
Attach the Camera to a surface that is clean, dry, flat and smooth.
The Camera must be installed with the spherical lens pointing down.
The Camera should not be facing sunlight or other strong light sources including
installation opposite to a window.
The Camera should be placed in a position where it will capture images from the main
point of entry.
For maximal effective detection range, the center of the Camera should be installed 2.1
meters (6.9ft) to 2.3m (7.5ft) above the floor.
Note: Lower positioning of the Camera will limit its detection range.
For daytime coverage – the Camera must be mounted within 10m (33ft) of the desired
coverage area.
For both day and nighttime coverage – the Camera must be mounted within 6m (20ft)
of the desired coverage area.
The Camera must be mounted within 700m (2300ft) (open air nominal) of the CCU.
The wall mounting base includes eight (8) holes to allow maximum flexibility of
installation.