User Guide Part 2

Installation of the We.R™ System
50
This window is a sub-set of the initial registration procedure (see paragraph 3.2.3.
above) which allows (by tab selection):
Re-setting of the Time Zone defined in the initial registration procedure (see
page 41) by selecting it from the roll-down selection menu which opens upon
clicking over the button.
Any change made to the previously defined Time Zone need to be saved by
clicking over the button.
Termination of this activity is done by clicking over the button.
Manual entry of APN data; a similar process to the one described in the
above sub-paragraph 3.2.3.1.
Note that the CCU’s _Serial #_ appears grey and cannot be edited, since we
are dealing, at this point in time, with a formerly registered system.
The button brings up a quick help file for APN data entry.
Following the entry of all APN data, there is a need to click over the
button to transfer the data onto the CCU’s memory.
Termination of this process is done by clicking over the button.
Figure 22: Manual Entry of APN Data Window