User Guide Part 2

Installation of the We.R™ System
30
A smartphone (optional) for remote system management.
A small screwdriver.
The Central Control Unit’s identification serial number should be registered prior to the
installation process.
Stickers with the serial number can be found inside the battery/SIM-card cavity and
under the Central Control Unit’s base as illustrated in Figure 4 below.
Figure 4: CCU Serial Number Locations
Note: You may also want to register this serial number in Appendix H
Owner’s Records of this User Guide (page 301) where important data of
your system is aggregated for future reference.
This chapter of Installation of the
We.R
System provides information about each and every
component of the system including its installation, power-up, configuration, integration into the
system and operation.