User Guide Part 2

Installation of the We.R™ System

We.R

™

System User Guide

i. Call your cellular Service Provider and obtain all APN data (APN name, APN user and

APN password).

Note: You may want to record the APN data to Appendix H of this User

Guide where important data of your system is gathered for future reference.

ii. Select the _Country_ and _Operator_ (Cellular Service Provider) from the roll-down

menus in the APN Settings Configuration window (see above Figure 17).

iii. Manually type-in all the APN data retrieved from the Cellular Service Provider.

iv. In the _SIM card of the Panel:_ field, type-in the international cellular telephone number

of the SIM-card (digits only, no prefix, for example: 972522728110) and the CCU’s

serial number (see page 30 and Appendix H) and click over the

button.

v. Wait for the front panel LED to turn green (may take up to 15 minutes).

In case the manual entry of APN data is done for a CCU which was already registered

(i.e. upon replacing a faulty SIM-card), the APN Settings Configuration window shown

in the above Figure 17 will pop-up with the CCU’s Serial Number already typed-in (but

greyed-out) as illustrated in Figure 18 below:

Figure 18: APN Settings Window for a Registered CCU