User Guide Part 2

Installation of the We.R™ System

We.R

™

System User Guide

3.2.3.1. Manual Access Point Name Data Registration

In case a problem is encountered during the initial registration procedure, with the Access

Point Name (APN) data; you need to contact the SIM-card’s Cellular Operator/Service Provider

and get all of the APN data.

This data need to be manually typed into the registration data fields.

This is done by clicking over the _APN Settings Registration >>_ menu option of the roll-down

menu added to the Login window (see above Figure 10).

Once the _APN Settings Registration >>_ is clicked over, the APN Settings Configuration

window pops-up:

Figure 17: APN Settings Window

Most market available SIM-card’s APN data is pre-programmed into the We.R

™

system and

being updated on a regular basis, therefore:

1. The automatic process executed following the click over the button (see line-

item 14 on page 40) should complete the registration process with no problem.

In case the process does not complete properly (the LED did not turn green):

Note: A short-form explanation regarding this process is also available

online by clicking over the button.