User's Manual

7
Quick Setup Guide
Hardware Installation:
1. Remove the back cover of the Hub,
2. Do one of the following, according to your choice of
external communications channel:
● Insert the SIM-card , if your HUB supports GSM
Communications.
● Attach an Ethernet LAN cable between the port on
the back of the Hub and a free socket in your Internet
modem or router.
NOTE: If you choose to install both the SIM-card and LAN
cable, the cellular channel is used as backup.
3. Insert the backup battery
10
over the SIM-card with
the contacts facing downwards and towards the base
and return the back cover of the Hub.
4. Plug a power cord into the mini-USB socket on the back of
the Hub and plug the cube into a power outlet. The Hub
LED lights up Red. The LED switches to Orange when the
Hub connects to the network.
5. Wait for the front panel LED to turn Green. It should
take about a minute.
The WeR@Home™ Hub
2.1