User Manual

Operation
62
EverGuard Control Panel
and specify the number of redial times (specifically with messages, voice, and
video).
 Select the Message, Voice, or Video tab to set the configurations.
 For Sequence, enter up to six numbers to be called.
 From the No. of Retries dropdown list, select between 1 and 8 times to
redial the sequence.
8. Click Update to refresh all of the information displayed in the Dial Sequence
section.
9. To access the Dialer Configuration dialog box, click Config.10.
10. To access the APN Configuration dialog box, click GPRS.
11. Click to return to the Control Panel screen.
Note: For compliance with the EN 50131 standard, also add the home-
owner cellular phone number as the last entry to the dial sequence, so that
if all communication with the monitoring station is lost, he will get an SMS.
This SMS has some encoded data in it and it looks like this:
“ESIP04D010501010199000003000110519005303E#
XDN000020NNNICE19ZL34NIUP00…”.
The only meaning for the user is that the communication with the
monitoring station is lost.
 To configure the User Settings parameters:
Using the User Settings Screen, you can configure the parameters of up to 31
Users. User can be set to one of three types, Master, Standard, or Access Only,
according to their Privilege status on the premises. Their Entry/Exit attendance
can be tracked.
1. On the MAIN tab, click Users. The User Settings screen appears.