User Manual

Operation
EverGuard Control Panel
55
 To configure the APN (GPRS) Configuration:
Using the GPRS Configuration dialog box, configure the destination servers for
indoor/outdoor videos. The APN (GPRS) Configuration screen is divided into the
following parameters sets:
 Test Scenario Configuration – used during system testing and when
modifying the configuration
 Comfort Scenario Configuration – used when the end user tests the device
 Security Scenario Configuration – set for normal use
Note: When the GPRS Configuration dialog box is initially opened, all
checkboxes are unmarked, and all of the parameters are dimmed
and not configurable. Click a checkbox to enable the parameter.
1. On the Control Panel screen, click GPRS Configuration button. The APN
(GPRS) Configuration dialog box appears.
Figure 22: APN (GPRS) Configuration Dialog Box
2. To edit a specific parameter, mark the relevant checkbox. The parameter is
enabled. You can then modify it.
3. For the Test Configuration, Comfort Configuration, and Security
Scenario Configuration parameters, define the following: