User Manual

Operation
EverGuard Control Panel
53
Note: If the panel connection has been set to Serial (COM), the
GSM module must be disabled.
 SIM Pin-Code - Enables or disables the SIM pin code. When using SIM
cards that are unlocked and do not require a PIN code, the SIM Pin-Code
parameter should be disabled.
 SIM Center – Enables or disables the SIM center, which is the cellular
service provider.
 GSM SIM Center Phone Number – Defines the SIM Center telephone
number. To add a GSM SIM Center Phone Number, the SIM Center
parameter must be enabled.
 GSM SIM Pin-Code – Defines the 4 digit SIM pin-code. To add a SIM
PIN code, the SIM Pin-Code parameter must be enabled.
 Account Number - Defines the panel’s account number, when
necessary.
 To configure the Dialer Configuration
Using the Dialer Configuration Screen, configure dialer parameters for:
 SMS Configuration
 GPRS Configuration
 GSM DATA Configuration
 Cycle Permanent (minutes)
 GSM Configuration
 Video Configuration
Note: When the Dialer Configuration dialog box is initially opened,
all checkboxes are unmarked, and all of the parameters are
disabled. Click a checkbox to enable it.
1. On the Control Panel screen, click Dialer Configuration button. The Dialer
Configuration dialog box appears.