User Manual

Operation
EverGuard Control Panel
49
After any change, press the communication button, and a dialog box appears
to state that the Communication status is being changed.
6. Under Home Automation, to activate a door lock, click Door Lock.
7. To activate an RF Output device, click RF Output.
8. To activate and X-10 device, click X-10.
3.3.2.6 Status Tab
The Status tab contains the same information as is
found on the Panel Information dialog box.
Two additional items in this tab are:
 Checksum – displays N/A
 This is only relevant for remote boot otherwise it
displays NA
 Get Status – refreshes the data in the status
tab
 To display System Parameters:
The System parameters screen is a read-only display of the system parameters
and their current settings.
 On the MAIN tab of the Navigation pane, click System. The system screen
appears.