User Manual

Operation
EverGuard Control Panel
45
 Partition – In Part Arm mode, indicates the number of the partition that
is armed
Communication Status – Communication mode in operation
 NTS - no transmission status
 CCS - continuous cycle status (default setting and after activation)
 ITS - test mode, used by the technician during initial panel configuration,
modification, or upgrade
Note: The test mode remains in effect for only two hours. It will
automatically revert to its previous state if a new a state is not manually
selected or if an operative code is not sent.
Maintenance - status of the last software update
 End Install – Complete = successful update
 RF Update – Complete = successful update
Account – ES7000EG Control Panel ID number
Communications – Sets the desired Communication mode (See
Communication Status above)
 NTS
 CCS
 ITS
Last Connection
 Time – the time when the ESI-CMS was last connected to this particular
ES7000EG control panel
 Date - the date when the ESI-CMS was last connected to this particular
ES7000EG control panel
Firmware
 Main CPU – firmware version number of the main CPU
 RF CPU – firmware version number of the RF CPU
 Serial Num - ES7000EG Control Panel serial number
Real Time Clock
 Time
 Date
GSM Coverage – displays the quality in percentage of the cellular connection
Command
 Arm/Part Arm/Disarm – Sets the Security operation mode on the
ES7000EG or ES7000EG Control Panel
 Refresh – refreshes the data from the panel