User Manual

Operation
38
EverGuard Control Panel
Figure 10: Atlas Mobile Panel Status
3. Roll to Code and Click.
4. Enter the 4 digit activation code.
5. Click Update.
6. A message appears stating whether or not the activation code was
accepted and stating the current status of the system.
7. Click OK.
 To configure the Account Information:
The Account Number identifies the customer to the control center. The default
settings of a new panel define the Account Number as 0. A Red message is
displayed stating DTMF not received.
The GSM phone number on the account info screen is the one that the monitoring
station uses to contact the panel.
1. On the Installation screen, roll the trackball to the Account Info
icon.
Figure 11: ES7000EG Account Info