User Manual

Operation
EverGuard Control Panel
27
3.2.7 Open Zone Status
A single status LED provides the Open Zone status information. The table below
details the Open Zone status indicators of the ES7000EG control unit.
Table 10: Open Zone Status Indicators
Open Zone
Yellow
While there is an open
zone
Detection
Yellow - one
blink
PIR/Shock sensor
detection
No Open Zone
Off
While there is no open
zone
3.2.8 Call Guard function
Pressing on the Call Guard button will dial to the predefined number (Usually the
monitoring center) for a full duplex speakerphone call.
A single status LED provides the Call Guard status information. An Audible “good
beep” is sounded when the Call Guard is engaged. An Audible “bad beep” is
sounded when the Call Guard is disengaged. The table below details the Call
Guard status indicators of the ES7000EG control unit.
Table 11: Call Guard Status Indicators
Call Guard Engaging
Yellow
Good beep
While call guard call is in
process
Call Guard is
Disengaged
Off
While call guard call
disengaged