User Manual

Installation
16
EverGuard Control Panel
4. Insert the SIM Card according to the instructions in section 2.3 “ Inserting the
SIM Card”.
The figure below displays the full GSM/GPRS hardware assembly.
Note: When using a Samsung brand module with the ES7000EG control
panel connected to a power source, The LED lights up to indicate that the
GSM/GPRS Modem is synchronized with the GSM network. From power-up,
synchronization between the modem and the wireless telephone system
may take approximately two minutes.
When using Motorola brand module, this LED indicates an active GPRS
session.