User's Manual

Operation
EverGuard Express
57
Figure 30: APN (GPRS) Configuration Dialog Box
2. To edit a specific parameter, mark the relevant checkbox. The parameter is
enabled. You can then modify it.
3. For the Test Configuration, Comfort Configuration, and Security
Scenario Configuration parameters, define the following:
 Password – enter the Password received from the local SIM card provider
 APN – enter the Access Point Name received from the local SIM card
provider
 User Name – enter the User Name received from the local SIM card
provider
4. Click Close. You are returned to the Control Panel screen.
3.20.2.8 Photo Configuration
The Photo Configuration dialog box contains the following tabs:
 Suspect – RF Input device type
 Tamper Alarm – tamper action is detected only from the control panel
 Wrong Code – pin code entered five times incorrectly
 Duress Code – end user enters duress code
 SOS – end user presses panic button on the panel or key fob
 IPD Security – detects movement via indoor photo device
 Comfort – activated by a comfort command message
 Security – activated by a security command message
 All Units Scenario – activated by a command message
 OPEN/CLOSE – user attendance triggers photo upon arming/disarming
 Configuration – general definitions for photo