User's Manual

Operation
46
EverGuard Express
Figure 25: Panel Info Dialog Box
 To access the panel information:
1. From the Options menu, select Panel Info. The Panel Info dialog box
appears. The following information is displayed:
Security
 System status
 Arm – the system is fully armed
 Part Arm – the designated partition is armed
 Disarmed – the system is disarmed
Partition – In Part Arm mode, indicates the number of the partition that is
armed
Communication Status – Communication mode in operation
 NTS - no transmission status
 CCS - continuous cycle status (default setting and after activation)
 ITS - test mode, used by the technician during initial panel configuration,
modification, or upgrade
 The test mode remains in effect for only two hours. It will automatically
revert to its previous state if a new a state is not manually selected or if
an operative code is not sent.
Maintenance - status of the last software update
 End Install – Complete = successful update
 RF Update – Complete = successful update
Account – the ES6500EGE Control Panel ID number
Communications – Sets the desired Communication mode (See
Communication Status above)