User's Manual

Operation
EverGuard Express
41
Note: You need to set the GSM Phone number before you can click Send.
9. Click Send to generate a new DTMF code that is sent to the database. A
notification message is displayed on the screen confirming this action.
When complete, press the exit button (or back) and you are returned to the
main screen.
3.20.1.6 Configuring the User Settings
Different types of users can be defined with different permissions regarding
access to the secured area. Each user is assigned a unique pin number and entry
settings.
The available option combinations are listed in the table below.
Table 16: User types
Type
Attendance
Temporary
Master
or
Not available
Standard
or
or
Access Only
Attendance – keeps track of access (entrance and exit) to a log on the panel and
is provided to the control center. This log can be accessed at a later date.
Temporary – limits the number of accesses the user has to the secured area.
 To configure the User Settings:
1. On the Installation screen, roll the trackball to the User Settings
icon.