User's Manual

Operation
30
EverGuard Express
Icon
Status
Emergency Number is
engaged
Red
While an Emergency
call is in process
Emergency Number is
Disengaged
Off
Good
Beep
While an Emergency
call is disengaged
Table 12: Call Status Indicators
3.17.5 Monitoring Station Communication
The Monitoring Station can contact you via the EverGuard Express panel. It send
you a message which you may acknowledge and authorized the Monitoring
Station to telephone you.
 To authorize contact from the Monitoring Station:
1. When envelop LED ( ) flashed red, it indicates that the Monitoring Station
want to contact you. Press on it and a SMS message is sent to the Monitoring
Station to authorize them to contact you.
Note: The Monitoring Station has the amount of time as the voice
verification window has, in which their telephone call can be received.
3.17.6 Monitoring Station Status
A single status LED provides the Monitoring Station general status. An audible
good beep is sounded when the Monitoring Station button is pressed. The table
below details the Monitoring Station status indicators of the EverGuard Express
control panel.
Status
Call Monitoring
Station Request
Red
Flashing
Good beep
When the monitoring station
request an OK to phone, LED
flashes red
Calling Monitoring
Station/No
Monitoring Station
Request Received
Off
Good beep
LED turns off when an
acknowledgement for the
previous action has been sent
to the Monitoring Station or
remotely via ESI-CMS /no call
request is sent
Table 13: Monitoring Station Status Indicators