USER MANUAL Model: LCD2622 Please read this User Manual carefully to ensure the proper use of this product and keep this manual for future reference
Contents Safety and warnings 2-6 Introduction 7 Installation 8-14 Remote Control 15 Operation 16-21 Trouble Shooting 22 Wall Mounting Holes Spacing and Location 23 Base Stand Disassemble Illustration 23
SAFETY AND WARNINGS IMPORTANT SAFETY INSTRUCTION 1.Read these safety instructions. 2.Keep these safety instructions. 3.Heed all warnings. 4.Follow all safety instructions. 5.Do not use this apparatus near water. 6.Clean only with dry cloth. 7.Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8.Do not install near any heat sources such as radiators,stoves, or other apparatus (including amplifiers)that produce heat. 9.
SAFETY AND WARNINGS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN! CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit. The symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
SAFETY AND WARNINGS Warning High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel. Warning To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture. Warning Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver. Caution Do not block the ventilation holes in the back cover.
SAFETY AND WARNINGS Caution Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it falls. Caution Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual , and damage to the television, may result if it falls. Caution When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.
SAFETY AND WARNINGS Thank you very much for purchasing this TV. To enjoy your product from the very beginning, read this manual carefully and keep it handy for easy reference. INSTALLATION Locate the TV in the room where light does not strike the screen directly. Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Allow enough space between the TV and the wall to permit ventilation.
INTRODUCTION Main features Used as Television, display terminal,PC display High luminance,wide viewing angle Can store AIR 2-69,HRC 1-125,IRC 1-125,CATV 2-125 TV programs Dual HDMI interface 5 BTSC Main parameter Vie wing Picture Size(diagonal) Resolution Aspect Ratio TV System Video Signal System Receiving Channel Inpu t Power Voltage Po we r consumption Audio Output Powe r Signal Input Horizontal definition THD 7% TV line 26 1366x768 16 : 9 NTSC-M, NTSC-N NTSC/PAL/SECAM AIR 2-69 HRC 1-125 IRC 1-125
INSTALLATION Accessories AC Power Cord......................... 1 Infrared Remote Control...... 1 User s Manual ........................ 1 Battery(AAA).......................... 2 HDMI cable is no included.
INSTALLATION CONTROL PANEL SOURCE MENU CH+ CHVOL+ VOL- 1 SOURCE Display the input source menu. 2 MENU To display main MENU. 3 CH+/CHIn TV mode press CH+ or CH- to change the channel up and down. In MENU,press CH+ or CH- to select items in MENU. when TV is in standby mode, press CH+ or CH- button in TV control panel will power on the TV. 4 VOL+/VOLAdjust sound level. In MENU,adjust the item that you selected.
INSTALLATION ANTENNA Note: Aerial connections:IEC(female). Input impendance:75 unbalanced.
INSTALLATION PC STEPS: Be sure both the TV and computer are set to Power off. 1.Connect VGA and audio cable. 2.Connect the power cord. 3.Power on the TV, switch to PC mode. 4.Power on the PC. AV3 INPUT This sequence is very important.
INSTALLATION PC PRESET MODE(recommended resolution is 1024*768@60Hz) RESOLUTION V.Freq.(Hz) H.Freq.(KHz) 1 720*400 70 31.47 2 640*480 60 31.47 3 640*480 75 37.50 4 800*600 60 37.88 5 800*600 75 46.88 6 1024*768 60 48.36 8 1024*768 75 60.02 9 1280*1024 60 63.
INSTALLATION AV EQUIPMENT This TV provides three inputs for Composite (A/V), two inputs for S-Video, and one input for Component (Y/Pb/Pr) . You can use the input terminals on TV set rear as follows.
INSTALLATION Insert Batteries Into the Remote Control 1. Remove the battery cover. 2. Place 2 AAA batteries (included) making sure the polarity (+ or -) of the batteries matches the polarity marks inside the unit. 3. Mount the battery cover. Replace the batteries when the TV set begins to show the following symptoms: Operation is unsteady or erratic. Sometimes the TV set does not function with Remote Control Unit. Remark: 1) Alkaline Battery Recommended.
REMOTE CONTROL REMOTE CONTROL MUTE POWER 1 11 MTS/SAP 1 3 2 12 2 RECALL 4 5 6 7 8 9 MENU 13 0 SOURCE 14 3 15 ENTER 4 16 5 TV DISPLAY EXIT S.M + 6 CH VOL _ 18 _ P.M 7 17 + ASPECT AUTO 19 8 SLEEP V-CHIP CC TV AV1 AV2 9 20 10 21 AV3 SV1 SV2 YPbPr PC HDMI1 HDMI2 TV Source 22 23 NOTE: 4 coloured knobs on the bottom of the remote control is optional for other version 1: POWER To set the TV standby or on. 2: NUMBER KEY : For direct access to program.
OPERATION 1. PICTURE MENU The first item of the MENU is picture menu. You can adjust picture effects here, such as contrast, brightness, etc. Press to move, press to adjust. CONTRAST 60 BR IGHTNESS 47 TINT 50 COLOR 50 SHARPNESS 26 COLOR TEMP . NORMAL ASPECT. 16:9 Note: There are three colour temperature modes which can be selected : NORMAL, WARM, COOL. 2.SOUND MENU The second item of the MENU is the sound menu. You can adjust the sound here. Press to move, press to adjust.
OPERATION 3.FUNCTION MENU The third item of the MENU is the function menu. You can adjust the settings below: 1).3D NR: adjust this item , you can see the noise reduction effect in the picture only for TV and AV source. 2).CLOSED CAPTION: switch close caption mode.. 3).PARENT CONTROL: Enter V-chip control. 4).FACTORY DEFAULT: Reset all the settings to default value. FUNCTION 3D NR OFF CLOSED CAPTION OFF PARENT CONTROL FACTORY DEFAULT 1.
OPERATION ALL FUNCTION V S L D B B B B B B B B B B TV-Y U TV-Y7 B TV-G B TV-PG TV-14 FV B B B B B TV-MA ENTER KEY : BLOCK OR UNBLOCK Rating Content D L V FV S (Sexually (Fantasy (Violence) (Sexual (Adult violence) situation) language) suggestive dialog) Content TV-Y (All children) Suggested age TV-Y7(Direct to order children) X TV-G(General audience) TV-PG(Parental Guidance suggested) X X X X TV-14(Parents strongly cautioned) X X X X X X X TV-MA(Mature audience
OPERATION 5).English-rating:switch the english-rating control level:E,C,C8+,G,PG,14+,18+. Rating E Description Exempt: Includes news, sports, documents and other information programming: talk shows, music videos, and variety programming. Children: Intended for younger children under the age of 8 years. Pays careful attention to themes that could threaten their sense of security and well-being.
OPERATION 4.OSD MENU The fourth item of the menu is the OSD menu OSD OSD LANGUAGE OSD H-POSITION OSD V-POSITION ENGLISH 50 50 OSD TIMEONT 26 OSD TRANSPARENCY 26 5.CHANNEL MENU The fifth item of the MENU is channel menu(only use in TV source). You can complete channel search and setting here. CHANNEL MONO MTS AUTO SCAN FINE TUNE ADD ERASE SOURCE 1). AUTO SCAN Search all the channels automatically. 2). FINE TUNE Fine tune the current program. 3) .ADD ERASE 4).
OPERATION In PC Mode, there are two items that are different with other sources. 1. PC MENU You can adjust picture here, such as contrast, brightness. Press to move, press to adjust. PC CONTRAST 60 BR IGHTNESS 47 COLOR MODE NORMAL ASPECT 1.colour mode:only four modes could be selected: normal,warm,cool,user. 2.Press to move,press to adjust RGB value according to your personal taste under user mode. PC COLOR TEMP. USER USER-R 50 USER-G 50 USER-B 50 2. FUNCTION MENU 1).
Trouble shooting Trouble phenomenon Symptom Inspection Check Picture Audio Snow Noise antenna position, direction or connection Ghost Normal audio antenna position, direction or connection Interference Noise electronic equipment,car/ motorcycle,fluorescent light Mute Volume(check if mute is activated or if the audio system connections are not correct) Normal Picture Power cord is not inserted Power switch is not ON Contrast and brightness/volume setup Press standby key on the remote control fo
Wall Mounting Holes Spacing and Location 100 mm 200 mm Base Stand Disassemble Illustration How to remove the stand from the TV 1.Use the screwdriver to remove the screws from the screw location. 1.Remove the base stand from the Main body.
