User's Manual

Slide the Lock switch to the open position and open the lid. After inserting the battery, close the lid

and slide the Lock switch to the close position.

Step 6. Insert Battery into S1

Step 5. Attach the balance weight cap on the tilt motor

Step 7. Powering On & Using BacPac Mode

There are white dots located on the S1 gimbal

and the housing. Align the white dot on the

housing with the white dot on the S1 gimbal and

then turn the housing clockwise until it is locked

into place.

Step 4. Mount Camera Housing

on to S1 Gimbal

Note: If using S1 without the weight balance cap, it have

effect on operating and usage time. Please check

that weight balance cap is rmly attached to the S1

before operating the gimbal.

1. Press and hold the power button for 1 second to turn the

device ON.

2. Press the M button for 3 seconds to activate BacPac Mode.

USB Port