User's Manual

- Connect a compatible camera to the S1 gimbal. DO NOT turn the power on without a

camera connected to the S1 gimbal. It may cause malfunctions.

- Turn the power on the camera before turning on the gimbal.

- Hold the gimbal steady while powering on the gimbal.

- After used S1 on the beach, please wash the S1 with running fresh water.

Do not dive S1 under the water.

Unhook the latch on the top right side of frame housing and slide the camera into frame housing.

Close the latch to secure.

Cam's power can be turned ON/OFF using the button below the joint.

Please select "Wind Only" on MANUAL AUDIO CONTROL of HERO5 to use with S1.

2. Getting Started

2-1. HERO5 Users

Step 1. Insert the camera into the frame housing

Step 2. Turn the power on the camera

Step 3. "Wind Only" on MANUAL AUDIO CONTROL of HERO5

Warning

Note: If you do not select this option or select

"Stereo Only", noise can be recorded.