User's Manual

6
5. Pa
iring the Device
6. To Record
7. Audio Amplication Mode
1. Pairing A1 to M1
- Turn on the A1, and press the pairing button.
- Turn on the M1, and press the pairing button.
- When the devices are paired, the LED indicators on both devices
will turn blue.
2. Pairing A1 with other Bluetooth microphones (headsets).
- Turn on the A1, and press the pairing button.
- Turn on the power of the device you are trying to use with A1
and activate the pairing mode of the device.
- When the devices are paired, the LED indicator will turn blue.
This mode is used when M1 is being used in the waterproof hous-
ing case. It amplies the sound recorded through M1.
How to Activate
1. While the devices are paired, press the pairing button on A1.
2. When you see both red and blue LED lit at the same time, it
means you have succesffully activated the audio amplication
mode.
3. To deactivate, press the pairing button on A1 again.
1. When the devices are successfully connected, and A1 and its
connector are plugged in correctly, the camera will record the
sound received from the M1 to the video.
2. Switching Microphones: If you want to switch from M1 to GoPro
internal microphone
- While A1 is connected to the GoPro, turn off pairing mode
using the pairing button on A1 or just turn off the power to use
the internal microphone of GoPro. Turn on pairing mode to use
M1 again.
- Turn off the power of M1 or unpair the device using the pairing
button to disconnect the device. Then the internal microphone
of GoPro get activated.