Operation Manual

Esscom Twintalker 9210 33

Esscom Twintalker 9210

ENGLISH

13.13 Key-Tone On/Off

When a button is pressed, the unit will beep briefly.

To set the key-tone.

• Press 6 times. ‘to’ will be displayed.

• Press to enable (ON) or disable the key Tones (OF).

• Press to confirm your selection and return to the standby mode.

13.14 Dual Channel Monitor function

In stand-by, the PMR is set on one set channel with CTCSS code. The PMR will only receive

signals transmitted on that channel and CTCSS code.

Dual Channel Monitor allows you to monitor a second channel with CTCSS code.

• Press 7 times, DCM OFF appears on the display.

• Press or to change the channel.

• Press to confirm the channel selection and go to CTCSS

SUB-CHANNEL SELECTION

• Press or to change the CTCSS.

• Press to confirm.

To disable the function select ‘OFF’ when setting the channel.

When the Dual Channel Monitor function is activated, the PMR will switch

sequentially between the standby channel + CTCSS and the Dual

Channel + CTCSS.

13.15 Button Lock

• Press and hold and together for 4 seconds to activate the

BUTTON LOCK mode. The BUTTON LOCK icon is displayed on the

LCD Screen.

• Press and hold and together again to deactivate BUTTON

LOCK.

14 Technical specifications

PMR

Channels

CTCSS

Frequency

Range

Batteries PMR

Transmission Power

Modulation Type

Channel spacing

446.00625MHz - 446.09375 MHz

Up to 10 Km (Open field)

4 x AAA Alkaline or NiMh rechargeable battery pack

=< 500mW ERP

FM - F3E

12,5 Khz