Operation Manual

Technical Data
Protocol/Standards
• HomePlug 1.0 specification, IEEE 802.3 10/100 Ethernet (100Mbps) and
IEEE 802.3u Fast Ethernet Compliant
• 10/100 Mbps AutoMDI/MDIx Support
• 85Mbps / 14Mbps Homeplug 1.0 compatible
Modulation Support
• OFDM 256/64/16, DQPSK, DBPSK and ROBO Modulation Scheme
Frequency Band
• 4.3 Mhz to 20.9 Mhz band
Quality of Service
• Forward Error Correction (FEC) support
• Channel Adaptation ensures that signal integrity is maintained even under
harsh noise environment
• CSMA/CA with prioritization and ARQ for reliable delivery of Ethernet
packets via Packet
Encapsulation
• Four Level prioritized random access method
• Segment bursting and contention-free access ensures high throughput
while maintaining low latency response and jitter performance
Security Support
• 56 bit DES Encryption with key management for secure powerline commu-
nications (Utilize Windows 98SE, 2000, ME, XP to enable encryption)
Hardware
• Intellon INT5500 Integrated Single-chip Powerline Network Transceiver
• Intellon INT1200 Analog Front End IC
Platform Support
• OS Independent with TCP/IP protocol installed
Power Supply
• Switch Mode 90V-264V Supply for Europe/UK/US/Australia plugs
LED Indicators :
• 1 x Power LED
• 1 x Powerline Activity Status LED
• 1 x Ethernet Link/Activity Status LED
Temperature
• Operating : 0° to 40° Celsius
• Non-Operating : -25° to 70° Celsius
Humidity
• Operating : 30% to 80% Relative Humidity (Non-Condensing)
• Non-Operating : 30% to 95% Relative Humidity (Non-Condensing)