Owner's Manual

On-screen (OSD) menu system -SCREEN MONITOR
1.Press the "POWER" key on monitor or remote controller to turn on the monitor.
2.Press the "SELECT" key on monitor or remote unit, the OSD
(ON SCREEN DISPLAY) menu will be shown on the display as below.
BRIGHTNESS
CONTRAST
COLOR
TINT
MIRROR
RESET
EXIT
SCALING
3.Press "SELECT" key on monitor or remote unit to select the adjustment
item. Then press "UP" or "DOWN" key to adjust the new setting value.
Each adjustment item is shown as below:
*BRIGHTNESS Adjustment
Pressing UP key, the screen color gets more bright.
Pressing DOWN key, the screen color gets less bright.
*CONTRAST Adjustment
Pressing UP key, the screen gets high intensity.
Pressing DOWN key, the screen gets lower intensity.
*COLOR Adjustment
Pressing UP key, the screen color gets richer.
Pressing DOWN key, the screen color gets lighter.
*TINT Adjustment
Pressing UP key, the screen gets greenish.
Pressing DOWN key, the screen gets reddish.
*MIRROR Adjustment
Reverses the displayed image (useful with rear camera systems)
*RESET Adjustment
Returns all setting to factor values.
*EXIT Adjustment
Allows you to exit the OSD systems.
*SCALING Adjustment
Press "UP" or "DOWN" key to select the picture image to 16:9 or 4:3 display.
Page 9