USER'S MANUAL page CONTENTS Standard precautions Safety precautions EMV10.2SUD 10.2" DVD Flip Down TFT Swivel Monitor I Installation precautions II Operation precautions II What is included? III Monitor installation IV Releasing and opening the monitor V Powering up the monitor V Turning on the dome lights Monitor controls and features Congratulations on your purchase of a ii:» Video Monitor.
Standard Precautions Please read this manual carefully prior to the installation of your ~. mobile entertainment system a M.E.C.P. CERTIFIED INSTALLER IS RECOMMENDED. The location of this unit should not be visible to the driver in any way. This is for rear entertainment only. ~ assumes no liability for failure to follow the proper installation recommendations. Please keep this manual in a safe place for future reference.
Operating Precautions Turn the unit off when it is not in use. Avoid dropping any metal objects or inflammable items into the monitor ventilation slots. Do not place objects on or suspend objects from power cord, as this may damage the cord. What is included? When first unpacking your new flipdown monitor, please check first that the package contains all of the items below. If something is missing, contact the store where you purchased the player.
Monitor installation CAUTION: Make sure the screws are NOT long enough to go through the roof! Attach the monitor mounting plate by screwing through the headliner and into the existing roof supports or the wood bracket you made (see TIP below). 1 1 NOTE Hardware shown in this illustration is not provided due to varying installation requirements. Cut hole in headliner for metal plate to fit a 11/2 overlap is need for plate carefully secure plate to headliner or support beam [not roof].
Releasing and lowering the monitor To release monitor press release button carefully lower screen to your best viewing angle. Once the monitor is at best viewing angle the screen can swivel 10 degree left and right. When unit is not in use we recommend that you close the monitor. Push the monitor release button forward Pull the monitor screen down to the desired angle To avoid accidental damage, we suggest you always close the monitor assembly when it is not in use.
Powering up the monitor To turn the monitor on, press and hold the POWER button for two seconds. When the power is ON, if an input signal is present, the picture will be displayed on the screen. To adjust the monitor Image, press SEL to access the various adjustment controls such such as BRIGHTNESS and CONTRAST. Use the Down/Up buttons to adjust each parameter until you are satisfied with the picture quality. Turnin on the dome lights This unit features a three-position switch for the dome lights.
Monitor Controls and Features - DVD SYSTEM @ CD (!) DVD POWER ON/OFF This button turns the DVD system on and off. ® AVMODE (]) MONITOR OPEN SWITCH ® CONTROL SWITCH (DOOR/OFF/ON) Press this button to select the display source. DVD t _ AV1 _ AV2 ® I........ DVD SKIP BACKWARD Press this button to skip backward (chapters). @ ® @DVDINPUT I ~~I DVD SKIP FORWARD @USB INPUT @ SD CARD INPUT Press this button to skip forward (chapters).
Remote Control- DVD SYSTEM Battery ( BATTERY: CR2025) • Remote Control - MONITOR SEL OOWN up) PWR PWR Q V S MONITOR POWER Press this button to power on or off the monitor. MONITOR SELECT This button enables the on-screen display menu system. Once enabled, this button is used as an ENTER button. DOWN BUTTONS This button is used to decrease parameters in the on-display screen display menu system. UP BUTTONS This button is used to increase parameters in the on-display screen display menu system.
Remote Control - DVD SYSTEM EJECT Press this button to stop playing and eject the disc. f::'\ AVMODE DVD ~ Press this button to select the display source. 8 C0 8 G ...I _ AV1 _ AV2 I VOLUME INCREASE Press this button to increase volume. VOL VOLUME DECREASE Press this button to decrease volume. SKIP BACKWARD Press this button to skip backward (chapters). SKIP FORWARD Press this button to skip forward (chapters). PLAY/PAUSE A) Press once: to star playing. B) Press twice: to pause playing.
Remote Control. DVD SYSTEM 8 CD FUNCTION Press this button to have the DVD feature function as below, and press again to change into numeric key pad. This key is switch for DVD feature function and numeric key pad. CD AUDIO During in playback, repeat pressing this button to select the desired audio language to display. SUBTITLE During in playback, repeat pressing this button to select the desired subtitle to display. SUBTITLE AUDIO MENU Press this button to return to the DVD disc Menu.
System wiring - DVD SYSTEM On a towel or soft cloth, gently place the monitor assembly "face down" on a stable work surface. Using the wires provided, complete the audio, video and power connections in your vehicle as shown in the diagram below. AUDIO OUTPUT (RED) AUDIO OUTPUT (WHITE) ----~.....;..VID-E-O.:..OU-T-PU-T-I In IIIL..J--J q[]]~-[][J[]P ~OJ c::([]~~-[][J[]P OO~[D c::([][][J-~~[(JP (YELLOW) AUDIO INPUT 1 (RED) --A-UD-IO-IN-PU-T-1 I n ,........rf(] r1ll--. ~[][JLJ-J '--tLU~~-~~Uu.
Note: 1. Please remove the right-side of EMV1 O.2SUD dome light cover to define the door trigger. If it's positive trigger (+12 Volt), please put the switcher to the left - hand side. If it's ground trigger, please put the switcher to the right - hand side. (Default in ground trigger, switcher to the right - hand side). 2. Because of frequency interference, using multi monitors in your vehicle with built in IR can create distortion to the audio of headphones.
On-screen (OSD) menu system - DVD SYSTEM This monitor incorporates an on-screen menu display systems which permits you to setup the DVD for a wide variety of installations and applications. Enter the menu system by pressing the SETUP button on the front of the monitor or the remote control. Pressing the SETUP button steps you through the six main screens of the menu system. These are, in order: System Setup, Language Setup, Audio Setup, Video Setup, Speaker Setup, Digital Setup.
On-screen (OSD) menu system - SCREEN MONITOR 1.Press the "POWER" key on monitor or remote controller to turn on the monitor. 2.Press the "SELECT" key on monitor or remote unit, the OSD (ON SCREEN DISPLAY) menu will be shown on the display as below. BRIGHTNESS CONTRAST COLOR TINT MIRROR RESET EXIT SCALING 3.Press "SELECT" key on monitor or remote unit to select the adjustment item. Then press "UP" or "DOWN" key to adjust the new setting value.
Troubleshooting If you experience operation or performance problems with this product, compare your installation with the electrical wiring diagram on the previous page. If problems persist, read the following troubleshooting tips which may help eliminate the problems. SYMPTOM No picture or sound. CAUSE REMEDY Power cord is not properly connected. Check that power connections are properly made and all fuses are in functioning condition. AN input cables not Check all cables. properly connected.
Specifications MODEL EMV10.2SUD 10.2" DVD Flip Down TFT Swivel Monitor A1VSYSTEM Screen size 10.2" Video Compatibility NTSC/PAL LCD panel type Active Matrix TFT Resolution, pixels 800 x 600 Brightness 350 NITS GENERAL Operating voltage 12V DC All specifications subject to change without notice.
9855 Joe Vargas Way S. EI Monte, CA 91745 Office: 626-443-8324 Toll-Free: 1-888-377-8720 Warranty iii» products are warranted to the original owner for one year warranty. This warranty covers defects in materials and workmanship· Defective products will be repaired at the is>> headquarters Products that are no longer in production may be replaced with a newer version of similar design.
