SDS

EPS Block and Board
Safety Data Sheet
06/11/15 Carpenter Co. Page 3 of 6
SECTION 8: Exposure Controls/ Personal Protection
8.1 Control Parameters
Exposure Limits/Guidelines • OSHA has established PEL values of 15 milligrams per
cubic meters (mg/m
3
) for total dust and 5 mg/m
3
of
respirable dust (8-hour TWA) for such particulates not
otherwise regulated (PNOR).
8.2 Exposure Controls
Engineering Controls • General ventilation.
Eye/Face Protection • Safety glasses with side shields.
Respiratory Protection • None required under normal use.
Skin Protection • None required under normal use.
Environmental Exposure Controls • No data available.
Additional Protection Measures • None
9.1 Information on Physical and Chemical Properties
Material Description
Physical Form
• Solid
Odor
• Slight hydrocarbon
odor
Appearance
• No data available
Odor Threshold
• No data available
Color
• White
General Properties
Boiling Point
• Not measurable
Melting Point
• Not measurable
Decomposition
Temperature
• No data available
pH
• Not measurable
Density
• No data available
Water Solubility
• Negligible
Solvent Solubility
• No data available
Viscosity
• No data available
Explosive Properties
• No data available
Oxidizing Properties
• No data available
Decomposition
Temperature
• Not measurable
Specific Gravity/Relative
Density
• <1.0 (H
2
O=1)
Volatility
Vapor Pressure
• Not measurable
Vapor Density
• Not measurable
Evaporation Rate
• Not measurable
VOC (Vol.)
• No data available
Volatiles (Vol.)
• No data available
Flammability
Flash Point
• No data available
LEL
• No data available
UEL
• No data available
Flammability (solid, gas)
• WILL BURN IN FIRE
Auto-ignition Temperature
• >800
o
F (ASTM-D-
1929)
Environmental
Octanol/Water Partition
Coefficient
• Not measurable
SECTION 9: Physical and Chemical Properties