User manual

22 16 Channel Embedded Digital Video Recorder User Manual
1） Basic Setup
Setting Method:
（1） System Date Format: YYYY/MM/DD,DD/MM/YYYY,MM/DD/YYYY
Setting Method: press the Arrow Key to select the System Date Format Column, press PTZ button
to pop up the drop-down menu, then press the Arrow Key to select the appropriate format, press PTZ
button to apply the selected format.
（2） Time Zone
Setting Method: Press the Arrow Key to select the Time Zone Column, press PTZ Button to pop up
the drop-down menu, then press the Arrow Key to select the appropriate Time Zone, press PTZ button
to apply the selected time zone. (At present, this function is not available)
（3） System Date Setup
Setting Method : Press the Arrow Key to select the System Date Setup Column, press PTZ Button
to pop up the drop-down menu, then press the Arrow Key plus PTZ button to set the date, press Enter
button on the edit menu to apply the selected date.
（4） System Time Setup
Setting Method : Press the Arrow Key to select the System Time Setup Column, press PTZ Button
to pop up the drop-down menu, then press the Arrow Key plus PTZ button to set the time, press Enter
button on the edit menu to apply the selected time.
（5） Device ID:
When using special keyboard or IR remote control to dominate several DVRs, the machine ID is
needed. (At present, this function is not available in remote control)
Setting Method :
Press the Arrow Key to select Machine ID Column, press PTZ button to pop up the drop-down
menu, then press the Arrow Key plus PTZ key to set the ID, press the "Enter" key to apply the selected
ID. The range of Device ID is 0-255.
After the setting of the parameters, press the Arrow Key to click OK button, then press PTZ button
to save the above settings.
Picture 4-29