User manual

18 16 Channel Embedded Digital Video Recorder User Manual
5. PTZ ID: Press the arrow key to select [PTZ ID], popup dropdown menu with click of PTZ,
and then press the arrow key to choose the number, finally enter PTZ to apply the selected
number. PTZ IP ranges from 0-255.
Picture 4-21
6. Color Setup: Through the setup of color, bright contrast, saturation, hue to set the display of
channel.
Press the arrow key to select [Color setup] and PTZ to enter the interface. With the click of arrow key to
chose bright, contrast, saturation, hue respectively and use the right and left keys to adjust number.
After the adjustment, press ESC to exit the interface, in the end, press the arrow key to select "enter"
and save the settings with the click of PTZ. (shown as picture 4-22)
Picture 4-22
4.7.4 Network setup
Enter [main menu]→ [network setup], the interface shown as picture4-23.
1) Basic setup: Connection Mode, IP address, Net mask, Gateway, NTP Server, HTTP Port, Media
Port,
（1） Connection Mode: Dynamic IP and Static IP
Static IP refers to the IP address, Net mask and Gateway assigned manually, this requires
that we're going to apply for an IP address from network administrator. Dynamic IP refers
to IP address assigned by the Dynamic Host via DHCP, you don't need to set IP, Gateway
or Netmask manually.
Setting method: Press the arrow key to select [Connection mode], popup dropdown menu
of PTZ, and then press the arrow key to choose the connection mode with PTZ key.
（2） IP/ GATEWAY /NETMASK Setup
Only when the Static IP is selected as network connection mode, then
IP/GATEWAY/NETMASK could be activated.
Setting method: Move down to IP, and press the PTZ to popup the edit menu, enter the
desired IP. Setup of Netmask and Gateway is same way.