Specifications

50
Complete the installation of the IE plug-in unit as prompted.
Automatic installation of plug-in unit:
First add the IP address of the DVR as a reliable site of the system. For example,
if the IP address of the DVR is 192.168.1.100, first open IE Attributes—Internet
Options—Security Options for an ordinary XP system, as shown below. This can
be set in 8 steps.
After setup, enter the IP address in the IE address bar, and complete the automatic
installation of the plug-in unit as prompted.
4.3 IE log-in
Log in the system after the plug-in unit has been installed. For example, if the
domain name of the DVR dvrtest05.eicp.net and its port is 80, enter the domain
name in the IE address bar, as shown below, select the login language “Simplified
Chinese”, “English” or “Traditional Chinese” on the screen, enter the user name
and the password, select “LAN” or “WAN” depending on the network
environment, and click “Login” to log in the client end or access the DVR end
remotely.
ein
p
utIP
④cancel optional
⑤click
⑥
cclick
⑦click
⑧
②click